NMS-COMPACT

CCTV Auto-Recovery Controller

Everything an enclosure needs (network hub, PoE, amplifier, DC and AC) is built in, so it automatically restores power to connected network equipment without extra devices.

Suited to enclosures with multiple network cameras
Checks the status of connected network devices and controls them automatically
Control the power of any device directly from a remote location

Get a quote Call us +82-2-2671-4584

Key features

Suited to enclosures with multiple network cameras
Checks the status of connected network devices and controls them automatically
Control the power of any device directly from a remote location
Built-in hub, PoE and amplifier, so no extra equipment is needed
Sensor input port for use with door open/close detection
Check the temperature and humidity inside the enclosure with a sensor
Real-time monitoring of the enclosure and connected cameras
Detachable hub and PoE sections, which are vulnerable to lightning, for easy servicing

Specifications

Model	NMS-COMPACT
Network input	RJ45 10BASE-T/100BASE-TX, Auto-Negotiation
Network hub	1 input / 4 outputs
Sensor input	2 channels (N.C / N.O selectable per channel)
Contact output	Fan contact 1 channel / heater contact 1 channel
DC output	DC24V 500mA (always on)
Temperature/humidity sensor	Temperature: -40 ~ 99℃ / humidity: 0 ~ 99%
Thermal protection	Built-in fan runs when the internal temperature reaches 50℃
AC sockets	6 channels (AC220V 300W per channel)
DC output	4 channels (5, 9 or 12V selectable per channel / 12W per channel)
PoE output	4 channels (IEEE 802.3af Mode B / Class 0, 1, 2, 3)
Rated output	1 channel (30W / 330Ω)
THD+N	RL=330Ω 1/2W POWER : ≤ 10%
Signal-to-noise ratio	RL=330Ω 87.5dB
Operating temperature / humidity	0 ~ 50℃ / 80% RH or less
Power / consumption	AC220V 60Hz / 260W (max)
Dimensions / weight	300(W) x 125(H) x 330(D) mm / 8.5 Kg